HP Printer is an outstanding and excellent printer known for its unbeaten and superb printing quality. Suppose you are prepared to print documents or reports with an HP printer; a quick message is shown on your screen for no paper even if it is available. To remove it, follow the below troubleshooting steps to fix this error.
● Reset your printer
● Check and load paper again
● Change the paper settings
After going through the above troubleshooting procedures, if error is not resolved, you must dial the HP printer customer service number to rectify it.
See also:
Solution one: Reset the product
With the printer turned on, disconnect the power cord from the rear of the printer.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the printer.
Turn the printer on.
If these steps resolved the issue, you do not need to continue troubleshooting.
If the issue persists, continue to the next solution.
Solution two: Check the condition of the paper, and then reload it
Replace any ripped, dusty, wrinkled, or bent paper. NOTE: Use only plain, white, unused paper in the product until you resolve the issue.
Make sure that all of the paper in the tray is the same size and type. Never load mixed types of paper at the same time.
Tap the stack of paper on a flat surface to align the edges.
Make sure that the stack of paper has at least 10 sheets and no more than 25 sheets of paper. NOTE: Do not load too much paper in the product.
Insert the stack of paper into the product, and then gently push the paper guides snugly against the paper. Make sure that the paper is fully inserted into the product.
Try printing again. If the issue is not resolved, try loading different brands of paper and different types of paper, one type at a time. Then, try printing again.
If these steps resolved the issue, you do not need to continue troubleshooting.
If the issue persists, continue to the next solution.
Solution three: Adjust the paper settings in the print driver The paper settings in the print driver must match what is loaded in the tray. NOTE: These changes do not change the default print settings. The print settings return to default the next time the program opens.
Open the document that you were trying to print when the issue occurred.
Click File, and then click Print. The Print dialog box opens.
Click the button that opens the Properties dialog box. Depending on the software program, the button might be Properties, Options, Printer Setup, Printer, or Preferences.
Click the tab that provides paper type and size settings. The tab might be Features or Paper/Quality.
From the Size is drop-down menu, select the paper size that matches the paper in the tray.
From the Type is drop-down menu, select the paper type that matches the paper in the tray.
Click OK, and then click OK again to print the document.
NOTE: If the issue is resolved, and you want to print on another type of paper, load the new paper type, and then repeat the previous steps for the new paper.
If these steps resolved the issue, you do not need to continue troubleshooting.
If the issue persists, continue to the next solution.